Filler Compounds

RestoKrete™ Epoxy Filler Compound No. 209


Epoxy Filler Compound No. 209 is an epoxy formulation specifically designed to fill voids, irregularities and air pockets in concrete.   The filler compound provides a smooth service for the application of the SewerGard® lining and coatings.  No. 209 is suitable for application over damp or dry concrete surfaces and is easy to apply.   It also has a quick dry time for high production rates.

RestoKrete™ Epoxy Filler Compound No. 209FS (Fast Set)


Epoxy Filler Compound No. 209FS (Fast Set) is a quick-setting formulation of the original No. 209 for filling voids, irregularities and air pockets in concrete.  Initial set in one-hour at 70°F and may be top coated with a SewerGard® lining after only one hour.

RestoKrete™ Epoxy Filler Compound No. 209HB (Hi-Build)


Epoxy Filler Compound No. 209HB (Hi-Build) is an epoxy material specifically designed to refinish large surfaces and open joints within concrete.  No. 209HB provides a smooth finish and appropriate bonding surface for SewerGard® epoxy lining systems.  The High Build version is formulated to fill large voids, minimize sagging and permit thick application where necessary.

RestoKrete™ Epoxy Mortar No. 208


RestoKrete™ Epoxy Mortar No. 208 is an epoxy-based mortar repair material where structural integrity needs to be restored. The No. 208 is used specifically for resurfacing applications requiring a heavier material thickness with tenacious bonding properties.  This mortar is highly recommended in structures located above grade and exposed to climate during installation and cure.  This material may be pumped, straight-shot or trowel applied. It also acts as a waterproofing barrier for the prevention of inflow and infiltration in concrete or brick substrates.